During the cleaning process of Stainless Steel Castings, the surface of the product is not allowed to have oxide scale and sticky sand to affect the processing of its parts. The inner cavity of Dongying Shengyu Precision Casting products is not in the process of processing. Any residual sand core block, burr, flash and other defects.

The geometry of stainless steel castings is complete in the process of processing, and the sand removal damage on the surface that does not need to be processed should not be greater than the size deviation there. No matter what material of the casting, the residual riser roots need to be left. Except in time.

The processing surface of stainless steel castings is not allowed to have the residual amount of the pouring riser. When the product is repaired, the processing surface can be made of grinding wheels or other tools. In the process of repairing, the welding mouth needs to be repaired and flattened according to the parent body, and then Clean up the splashed casting welding slag.

After the stainless Steel Casting is shot blasted, the product is effectively processed without magnification. The code of the workpiece in the product should not be able to see its dirt and oxide scale. The surface of the product should be uniform and the color should be metallic. .

During the production of stainless steel castings, some hardware facilities and management problems will appear to be deformed. The product needs to find its mold presets before wax injection until the mold temperature is the same as the room temperature of the wax injection chamber. Start waxing.

After the finished product of stainless steel castings comes out, the self-inspection is first required. During the self-inspection, it is mainly to see whether the product is deformed or defective during processing. It is recommended to use jig inspection as much as possible after the finished product is shipped. , This can effectively detect its accuracy and speed.

Hard materials can be used when processing stainless steel castings. During use, the surface of the product must be wear-resistant. For some parts with a relatively large area, the tonnage of the press must be calculated reasonably. Dongying Shengyu Precision Casting foundry is like this It can effectively avoid its waste and lack of power.